New features:
- New firmwares 3.10 and 5.0 (beta-version) for devices Galileosky 10 is added.
- New firmwares 48.10 (release-candidate) and 50.0 (beta-version) for devices Galileosky 7x is added.
- In a "File editor" user interface the file content updating during the recording feature is added.
- Support for the new CAN database is added (compatible with firmware 5.0 for Galileosky 10 devices).
Changelog of firmwares 48.10 and 3.10:
New features:
- MAC address verification during BLE sensor scanning is made case-insensitive.
- Data conversion formulas for CAN is made case-insensitive.
- Extended tags 0xB4-0xB6 have been added to the Galileosky protocol, containing MAC addresses of clients that are connected and uploading data.
- Transition to the new Yandex LBS API has been completed.
Corrections:
- Operation with SIM7070G modem has been fixed.
- Work in Hub mode has been fixed.
- APN functionality on devices with Ublox LTE modems has been fixed.
- Stability and performance have been improved.
- Device connection via BLE is improved.
Changelog of firmware 5.0:
New features:
- A vehicle database has been added for parsing data on the CAN bus.
- The length of string parameters in commands received by EasyLogic has been increased to 255.
- The speed of analyzing and converting KML files into geozones has been improved. The ability to work with pre-generated files has been added.
- The data transmission algorithm over GPRS networks in weak signal conditions has been improved.
- Device reconnection when changing access settings to SD/eMMC has been added.
- The ability to send a response to a command received via Bluetooth or SMS has been added in EasyLogic scripts.
- The buffer size for file names in the functions FileSize, FileRead, FileWrite, and FileDelete has been increased to 255 in EasyLogic.
- The BLE type (4) has been added to the CONNECTION_TYPE variable in EasyLogic.
- Transition to the new Yandex LBS API has been completed.
- Extended tags 0xB4-0xB6 have been added to the Galileosky protocol, containing MAC addresses of clients that are connected and uploading data.
- Added a warning about the need to correctly remove USB from the terminal when MSD 1.
- Messages from the internal coordinate source are no longer displayed if an external source is used.
- The TIMESYNCGNSS command has been added to allow disabling time synchronization with the GNSS module's time.
- Tags 0x11 - UID (32-bit) and 0x36 - PDOP have been added.
- The ARCHIVESTATCOLLECTOR command has been added to view statistics of points collected by the hub from client terminals.
Corrections:
- The size of the PressurePro tag has been corrected.
- Wi-Fi stability has been improved.
- Issues in Bluetooth data transmission have been fixed.
- The diagnostic information collection function has been improved.
- An issue in setting network priority for terminals with a SIM7070G modem has been fixed.
- The operation of the SD/eMMC archive has been fixed.
- Stability and performance have been improved.
- Data loss when receiving on RS485 in the "EasyLogic RS485 handlers only" mode has been fixed.
- The "Timeout of sending to the hub" parameter for Wi-Fi after resetting the settings has been fixed.
- The geozone sector intersection check has been fixed, ensuring accurate detection of points inside polygonal geozones.
- Data sending in Hub mode has been fixed.
- Issues with A7602E modem operation have been resolved.
- Support for signed min and max parameters has been added to the Rand function in EasyLogic.
- The conversion of the first word to uppercase when receiving SMS from authorized numbers has been fixed.
- An error saving data to a file in Hub mode when connection with clients is lost during data transfer has been fixed.
- Recovery of operational data from the last archive record after device reboot has been fixed.
- Memory leaks or unexpected reboots during data unloading via protocols have been fixed.
- APN functionality on devices with Ublox LTE modems has been fixed.
- Device connection via BLE is improved.
Changelog of firmware 50.0:
New features:
- The length of string parameters in commands received by EasyLogic has been increased to 255.
- The speed of analyzing and converting KML files into geozones has been improved. The ability to work with pre-generated files has been added.
- The data transmission algorithm over GPRS networks in weak signal conditions has been improved.
- Device reconnection when changing access settings to SD/eMMC has been added.
- The ability to send a response to a command received via Bluetooth or SMS has been added in EasyLogic scripts.
- The buffer size for file names in the functions FileSize, FileRead, FileWrite, and FileDelete has been increased to 255 in EasyLogic.
- The BLE type (4) has been added to the CONNECTION_TYPE variable in EasyLogic.
- The transition to the new Yandex API for LBS location determination functionality has been completed.
- Extended tags 0xB4-0xB6 have been added to the Galileosky protocol, containing MAC addresses of clients that are connected and uploading data.
- Added a warning about the need to correctly remove USB from the device when MSD 1.
- Messages from the internal coordinate source are no longer displayed if an external source is used.
- The TIMESYNCGNSS command has been added to allow disabling time synchronization with the GNSS module's time.
- Tags 0x11 - UID (32-bit) and 0x36 - PDOP have been added.
- The ARCHIVESTATCOLLECTOR command has been added to view statistics of points collected by the hub from client terminals.
Corrections:
- The size of the PressurePro tag has been corrected.
- Wi-Fi stability has been improved.
- Issues in Bluetooth data transmission have been fixed.
- The diagnostic information collection function has been improved.
- An issue in setting network priority for terminals with a SIM7070G modem has been fixed.
- The operation of the SD/eMMC archive has been fixed.
- Stability and performance have been improved.
- Data loss when receiving on RS485 in the "EasyLogic RS485 handlers only" mode has been fixed.
- The "Timeout of sending to the hub" parameter for Wi-Fi after resetting the settings has been fixed.
- The geozone sector intersection check has been fixed, ensuring accurate detection of points inside polygonal geozones.
- Data sending in Hub mode is fixed.
- Support for signed min and max parameters has been added to the Rand function in EasyLogic.
- The conversion of the first word to uppercase when receiving SMS from authorized numbers has been fixed.
- An error saving data to a file in Hub mode when connection with clients is lost during data transfer has been fixed.
- Recovery of operational data from the last archive record after device reboot has been fixed.
- Memory leaks or unexpected reboots during data unloading via protocols have been fixed.
- APN functionality on devices with Ublox LTE modems has been fixed.
- Device connection via BLE is improved.
