New features:
- New firmware 3.18 for devices Galileosky 10 is added.
- New firmware 48.18 for devices Galileosky 7x is added.
- RSSI value has been added for each BLE sensor in the table of the Bluetooth scanner.
- On the CAN scanner tab, two new forms have been added: "Vehicle parsing request" and "Report a vehicle error".
Corrections:
- The issue with exporting CAN tag settings to CSV on the CAN Scanner tab has been fixed.
Changelog of firmware 3.18:
New features:
- The EGTSMASK command has been added for selective transmission of subrecords using a bitmask.
- The EGTSPLUS command has been removed (its functionality has been migrated to EGTSMASK).
- Archive export to the EasyKeeper application over Wi-Fi has been added.
- The LBSCFG command has been added for configuring LBS functionality parameters.
- The Galileosky protocol has been extended with extended tag 0x95, containing a 4-byte Cell ID (Cell Identity).
- Support for the QZSS satellite navigation system has been added.
- The ability to disable system time synchronization—from NTP servers via Wi-Fi and from the GNSS module—has been added.
- Text and binary buffers for responses sent from EasyLogic have been increased.
Corrections:
- The response to packet bitmask configuration commands (*PACKBIT) has been fixed.
- SIM card switching in mobile network operator code-based modes has been fixed.
- The missing response to the RESET SMS command prior to terminal reboot has been fixed.
- Stability when working with Bluetooth sensors has been improved.
- The spoofing filter has been enhanced.
- Cell ID acquisition for terminals equipped with SIM7500 modems in 2G (GSM) mode has been fixed.
- Time synchronization has been corrected.
- Device settings retrieval via Remote Configuration and BLE has been fixed.
- GPRS network connectivity during cellular network handover has been fixed.
- Hub connection by IP address (when the “Hub” option is not enabled for the server) has been fixed.
- GNSS module operation during prolonged terminal uptime has been fixed.
Changelog of firmware 48.18:
New features:
- The EGTSMASK command has been added for selective transmission of subrecords using a bitmask.
- The EGTSPLUS command has been removed (its functionality has been migrated to EGTSMASK).
- Archive export to the EasyKeeper application over Wi-Fi has been added.
- The Galileosky protocol has been extended with tag 0x95, containing a 4-byte Cell ID (Cell Identity).
- Support for the QZSS satellite navigation system has been added.
- The ability to disable system time synchronization—from NTP servers via Wi-Fi and from the GNSS module—has been added.
- Text and binary buffers for responses sent from EasyLogic have been increased.
Corrections:
- The response to packet bitmask configuration commands (*PACKBIT) has been fixed.
- SIM card switching in mobile network operator code-based modes has been fixed.
- The missing response to the RESET SMS command before terminal reboot has been fixed.
- Stability when working with Bluetooth sensors has been improved.
- Cell ID acquisition for terminals with SIM7500 modems in 2G (GSM) mode has been fixed.
- Time synchronization issues have been resolved.
- Retrieval of device settings via Remote Configuration and BLE has been fixed.
- GPRS network connectivity when moving between coverage zones of different mobile operators has been fixed.
- Hub connection by IP address (when the “Hub” option is not enabled for the server) has been fixed.
- GNSS module operation during prolonged terminal uptime has been fixed.