newfeatures:
1) Added the ability to operate terminals with Wi-Fi using the EasyKeeper application.
2) A parameter has been added to the SCRIPTIP command to specify whether downloaded algorithms are encrypted.
3) Added TIMESYNCWIFI command for managing time synchronization via Wi-Fi.
4) Increased socket I/O buffer size in Easy Logic. An optional buffer size parameter has been added to SocketSend and SocketRecv functions (default 512 bytes, range 64–2048).
5) In EasyLogic, the ability to set the PDOP parameter has been added to the "Set geo data" block and the SetCoordinates function.
6) The EGTSMASK command for selective transfer of sub-records using a bit mask is added.
7) The EGTSPLUS command has been removed (the option has been moved to EGTSMASK).
8) An extended tag 0x95 containing a 4-byte Cell ID has been added to the Galileosky protocol.
9) CANTAG8R, CANTAG16R, CANTAG32R commands for CAN tag configuration via BitShift and BitLength parameters have been added.
10) CAN bus configuration management from EasyLogic (commands with EL suffix) has been added.
11) CANSpy function and event sending capability in EasyLogic scripts have been added.
12) CAN bus activity LED indication has been added.
13) The MAXSENDSIZE command for limiting the maximum send packet size has been added.
14) In the Galileosky protocol, extended tags for transmitting neighboring cell tower data, Wi-Fi access points, and BLE beacons have been added.
15) In the EGTS protocol, 4 new subrecords have been added.
16) In EasyLogic, GetWifiSnapshot function for retrieving Wi-Fi scan results has been added.
17) The outgoing SMS queue has been increased to 20.
18) The UPGRADE command now supports specifying an exact firmware version (e.g., UPGRADE 48.25).
19) The UPGRADE command now supports downloading special firmware by name (e.g., UPGRADE coordfilter).
20) A tag containing the current network type (2G/3G/LTE) to the Galileosky protocol has been added.
21) A configurable coordinate quality filter parameter QUALITY_RECOVERY_COUNT has been added, defining the number of points dropped after a streak of low-quality coordinates (recovery fine-tuning, anti-drift).

corrections:
1) The problem with periodic interruption of data transfer to the server on terminals with SIM7500 and SIM7600 modems has been fixed.
2) The issue with automatic answering of incoming calls has been fixed.
3) Incorrect switching to SIM0 when activating EasyLogic SIM switching mode has been fixed.
4) The need for a reboot when switching the data transfer protocol is eliminated.
5) Response of packet bitmask configuration commands (*PACKBIT) has been fixed.
6) Switching between SIM cards in mobile operator code usage modes has beed fixed.
7) The lack of response to the SMS command RESET before rebooting the terminal has been fixed.
8) Receiving data from Bluetooth sensors when the "Bluetooth configuration/control" option is disabled has been fixed.
9) Retrieving of cell ID for devices with SIM7500 modems in 2G (GSM) mode has been fixed.
10) Time synchronization is fixed.
11) Periodic archive point recording during system time synchronization has been fixed.
12) CAN bus speed re-detection on data loss in J1939 and J1979 modes has been fixed.
13) LBS coordinate detection while parked has been fixed.
14) Registration in some LTE Cat-M1 networks has been fixed.
15) Engine status detection has been fixed.
16) Distance-based point recording with the engine off has been fixed.
17) An issue in remote control command parsing that caused short commands to not be recognized has been fixed.
18) CAN data zeroing when using CAN bus auto-baudrate detection has been fixed.
19) Issues in ZIP, UNZIP, and UNPACK commands have been fixed.
20) Automatic GNSS module re-enabling after being disabled via EasyLogic when the internal coordinate source switching timeout is non-zero has been fixed.
21) hdop filling on the LBS server response has been fixed.
22) The slow response to the PHONES command has been fixed.
23) CAN tag reset in j1939da mode when CAN bus baud-rate auto-detection is enabled has been fixed.
24) CAN message transmission in EasyLogic mode has been fixed.
25) Bluetooth connection stability has been improved.

annotations:

ATTENTION:
After the update, rolling back to previous firmware versions will not be possible.
Upgrading to this firmware is available from firmware 33.0 or greater.
This firmware requires bootloader 2.0 or greater.

For correct operation of the Eco Driving functions, when upgrading from firmware 42 and below, you must recalibrate the accelerometer with the "SHOCK 0" command

Archive in the internal memory will be lost after upgrade to this version, make sure the archive is uploaded.

The supplier (manufacturer) reserves the right to collect and process diagnostic information from the devices. This information allows for quick responses and adjustments to the operation of the devices. The Buyer has the right to disable this function in the settings according to the instructions (https://base.galileosky.com/articles/?readerUiPreview=1#!en-documentation/how-to-disable-the-diagnostic-information-collection). The Buyer who disables this function agrees to limit the Supplier's (manufacturer's) ability to improve the operation of the equipment and software.

Revision 0

Commit SHA hash 25404a71
