newfeatures:
1) The GSMAUTH command, which allows you to configure the type of authentication in the GSM network is added.
2) Possibility to disable the message bus to save RAM resources is added.
3) Function ChargerEnable is added in EasyLogic scripts.
4) Upload of the client archive from the hub is improved.
5) WebDav, Message Bus and Bluetooth configuration features are disabled by default.
6) Transmission of the 0x49 tag to the Galileosky protocol, the place where it is uploaded (server\hub), the channel through which it is uploaded (GSM\WiFi) is added.
7) The NODOUBLEPACK command that allows you to disable uploading the archive to the hub if it was sent to the main server is added.
8) Dedicated virtual COM port for receiving diagnostic messages is added.
9) SD/eMMC is available as a Flash Drive when the device is plugged into a computer.

corrections:
1) Registration in a GSM network is improved.
2) In Easy Logic, the initial state of the variable "PUSH_TO_TALK_BUTTON_STATUS" is fixed.
3) Time leaps on some Galileosky V7X devices is fixed.
4) The mechanism for determining the disconnection of an external GPS antenna is improved.
5) WebDav operating is fixed.

annotations:


ATTENTION:
Upgrading to this firmware is available from firmware 33.0 or greater.
This firmware requires bootloader 2.0 or greater.

For correct operation of the Eco Driving functions, when upgrading from firmware 42 and below, you must recalibrate the accelerometer with the "SHOCK 0" command

Archive in the internal memory will be lost after upgrade to this version, make sure the archive is uploaded.

Revision 0
Commit SHA hash bea4979e 
